ULTRA FILTRATION
UF System Overview
Enerba Teknologi Ultrafiltration (UF) systems are designed to treat surface water, tertiary-treated effluent, rainwater, and wastewater to produce potable water or to serve as pre-treatment for reverse osmosis. It handles a wide range of highly variable water sources with turbidity levels of <300 NTU and suspended solids of <150 mg/L. The standard treatment process includes pre-filtration (150-micron screen filter), the Ultrafiltration process, and an Air Scour System.
Clean-in-Place (CIP) and Recovery System
Clean-in-Place (CIP) and recovery systems are provided to ensure effective membrane cleaning and performance restoration. These systems help maintain stable UF performance and extend membrane service life.
Additional treatment steps before or after the UF process can be integrated to meet specific feed water or filtrate requirements, such as iron removal, pH adjustment, or sterilization.
Benefits of Ultrafiltration (UF) Systems
- Easy operation
- Space-saving design
- Self-cleaning capability
- Low maintenance requirements
- Bacteria-free filtrate
- Complete turbidity removal
- Parasite and particle removal to 0.05 μm
- Low energy and chemical consumption
- Effective removal of bacteria and microorganisms
- Reliable operation even if a membrane fiber breaks
Enerba Teknologi Ultrafiltration
Enerba Teknologi Reverse Osmosis Seawater offers a reverse osmosis water package designed to eliminate other salts and constituents such as bacteria, sugars, proteins, dyestuffs and constituents that have a molecular weight greater than 150-250 Dalton. High pressure pressure pump adjustment ENERBA-RO SW is calculated based on your water salinity and varies from 55 to 65 bar.
Standart Equipment
- Control Panel with PLC
- Feed/CIP Pump
- Backwash Pump
- Membrane Cleaning System
- High–Low Level Tank Protection
- Flow Indicator
Enerba Teknologi Ultrafiltration (UF)
Enerba Ultrafiltration (UF) is designed to treat surface water, tertiary-treated effluent, rainwater, and wastewater to produce potable water or to serve as pre-treatment for reverse osmosis. It handles a wide range of highly variable water sources with turbidity levels of <300 NTU and suspended solids of <150 mg/L. The standard treatment process includes pre-filtration (150-micron screen filter), the Ultrafiltration process, and an Air Scour System.
Application
- Municipal Drinking Water
- Pretreatment to RO (SDI<3)
- Laundry Wastewater for reuse
- Recycling car wash water
- Wastewater Reuse
- Removal of bacteria from well water
Our Reference
The ultrafiltration system was developed to address clean water challenges in areas with peat water sources, such as Pekanbaru, where peat soil conditions and the absence of potable water sources make clean water difficult to obtain.
